Any Yamaha musiccast experts
Discussion
I have an N602, I only use the one pair of speakers and use the ipad app with it. I have 1 room set up, can I set another room up on the "B" speakers? Cant seem to see on the app where to add another room.
Also I plugged in a spare sub but it works both on A and B speakers which is annoying, any way to program this just to A for example?
Also I plugged in a spare sub but it works both on A and B speakers which is annoying, any way to program this just to A for example?
not used it, but yes you should be able to out put the audio from the MusicCast side of things to either A, B or A & B as it is (should be) just routing the audio to a different Amp or post amp output.
As for the Sub, unfortunately it isnt switched, so it will alway be on regardless of which output is selected. The only real way around it would be to run the speaker outputs at full range and find an amp with a speaker level input / pass through so you can only have it triggering when Zone1 is selected.
Hope that makes sense.
V.
As for the Sub, unfortunately it isnt switched, so it will alway be on regardless of which output is selected. The only real way around it would be to run the speaker outputs at full range and find an amp with a speaker level input / pass through so you can only have it triggering when Zone1 is selected.
Hope that makes sense.
V.
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff