Noble Down on power

Noble Down on power

Author
Discussion

David0595

Original Poster:

8 posts

89 months

Tuesday 12th May 2020
quotequote all
Hi Guys Please can you help. I have a 2002 (52) Noble M12 GTO 2.5L .I have had it tested on a rolling road recently and it is only running 240Hp. The car seems to be running ok from what i can tell it doesn't sound ruff. My car has only done 20000miles it has had thousands spent on on in its life ( Not By Me ) It has lots of pro alloy upgrades done. Is it possible it was re mapped but has be scrubbed off. I have no idea any suggestions on how to get some horses back would appreciate. Thanks

Ian Perry

256 posts

156 months

Wednesday 13th May 2020
quotequote all
I had this on my 3r ,if its been mapped when the ECU is plugged back into the loom one of the pins didn't connect properly .The car ran fine just down on power.Good luck.

Blu3R

2,370 posts

199 months

Wednesday 13th May 2020
quotequote all
It could be any number of things from a boost leak to cracked exhaust manifolds.
You'd need to give us some more details before we could help to narrow it down for you.

ludoZ3

126 posts

197 months

Wednesday 13th May 2020
quotequote all
Do you have the dyno graph with AFR showing?

mgbond

6,749 posts

232 months

Saturday 16th May 2020
quotequote all
Is it still running the Marelli ECU (behind off side rear wheel panel). When I bought mine it was 4yrs old and only 12k miles. Only made 260-280bhp. The original ECU goes out of cal and unfortunately they can’t be remapped so it’s a new ECU 2-3k I’m afraid. However after this and if you add a sports exhaust you can be 370bhp (don’t go more than this without forged pistons) my 2.5 is now 467bhp and should soon be 500bhp if all goes well. 😊

David0595

Original Poster:

8 posts

89 months

Sunday 17th May 2020
quotequote all
Hi Guys thanks for the replies
Here are some photos of the engine bay and a photo of the dyno graph
I will have a go at taking the wheel and the cover off to see what ecu I have
Fingers crossed it isn't the worst one.


[url]

|https://thumbsnap.com/taE2VTp8[/url][url]



Edited by David0595 on Sunday 17th May 12:29

mgbond

6,749 posts

232 months

Thursday 21st May 2020
quotequote all
If you ya e the Dyno plots. What were the AFRs? Because if it was anything like mine then it will be running rich.

David0595

Original Poster:

8 posts

89 months

Monday 1st June 2020
quotequote all
Hi guys finally got around to checking what ECU my car has . It has the MBE ecu does this mean a remap can be done ?

YellowShed

587 posts

283 months

Tuesday 2nd June 2020
quotequote all
It is possible to remap the MBE ECU, but it might be a tad difficult in the current climate...
Yellowshed

David0595

Original Poster:

8 posts

89 months

Friday 5th June 2020
quotequote all
Ok thanks yellow shed I understand
when do you think it would be possible?
what would be a rough cost to do this?
What sort of power would be possible from the remap ?

sorry for all the questions

Kind regards David

mgbond

6,749 posts

232 months

Thursday 11th June 2020
quotequote all
My mapper has started taking work. I’m booked in for 22nd June so Yellowshed must be able to soon. It’s not as if it can’t be done and social distancing rules applied.