Wheel alignment

Wheel alignment

Author
Discussion

Stevo302

Original Poster:

372 posts

97 months

Monday 27th July
quotequote all
Hi, does anyone know the Camber angles and tracking setting for my car please? (and any tips)
1971 Vixen 2500. Road use only. Dare not race it just in case something comes flying off that I forgot about..... smile

Thank you.

phillpot

16,012 posts

142 months

Monday 27th July
quotequote all



Little bit of neg camber and a touch of toe in wink

plasticpig1972

79 posts

5 months

Monday 27th July
quotequote all
Imho about 1° neg camber and toe-in 20 to 30 minutes.
Alan

Moto

1,006 posts

212 months

Tuesday 28th July
quotequote all
The TVR manual for the Vixen S3 states : front camber @ 1/2 to 1 1/2 degrees +ve; rear camber @ 1 1/2 to 2 degrees -ve; front toe in @ 20'; rear toe in @ 30'

However as with most Vixens my car is not running original tyre sizes.

My set up is : run front camber @ 1 degree -ve; rear camber @ 1 1/2 degrees -ve; front toe in @ 10 min +ve; rear toe in @ 15 min +ve

This feels good to me but it's a much lighter engine than the 2500 (not sure if this makes a difference) and wears 195/65 15 boots. Other than that all is pretty standard.

Moto