2500M - Side screens fixation

[Xadeb]

Hello
on my 2500M, one of my side screens has a few mm clearances. Nothing serious but some vivratioins appear in the ear of Madame ....
Again, no visible nuts ... it's a TVR!
if I understand correctly the bolts are screwed in plastic dowels which will tighten the side screen on the door .. correct?

What do you recommend to eliminate this play of 2-3 mm?

Thank you !

Edited by Xadeb on Monday 10th August 09:41

[Xadeb]

I forgot to mention that two bolts & plastic dowels are missing.
Is it still found ?

thank you !

[timelord]

Have a look in the door to make sure the steel plate securing the bottom of the alloy window frame haven't rotted away, alloy and steel bolted together, recipe for disaster! Geoff

[Xadeb]

Ok I will check it and take pictures
Tx

[Xadeb]

Below a few pictures of the steel plate. I dont know if you see something abnormal... ?
The problem could perhaps be easly solved if I find 2 missing new bolts and plastic dowels ...
This is perhaps the first thing to do.
--> do you know how to find such parts or alternatives ??






Do you know the role of this bolt ?

Edited by Xadeb on Tuesday 11th August 20:43

Edited by Xadeb on Tuesday 11th August 20:45

[nwarner]

You need to take the door trim off to check the metal plate that Geoff was referring to. The bottom of the frame that the glass slides up and down in is bolted to this metal plate which is where the adjustment is for the angle of the frame above the door.

Nige

[Xadeb]

Thanks Nige !
I will do it this we and keep you informed.

[Xadeb]

Thanks to your advices I solved yesterday the problem.
1 bolt missing
1 bolt to be adjusted