Hello look at photos please

Hello look at photos please

Author
Discussion

TonyOxford

Original Poster:

767 posts

179 months

Thursday 15th September
quotequote all
Hello All
I'm hoping to put silicone hose all round and polish up the two tanks but?

What is the size of the spaners I need for the oil cooler and the big tank please and are they hard to take off?

TonyOxford

Original Poster:

767 posts

179 months

Thursday 15th September
quotequote all
Who would be the best people to get the blue silicone Kit hoses from? And what size spanner do I need for this is it glued on I tried grips and it's not moving

porterpainter

373 posts

19 months

Thursday 15th September
quotequote all
Can’t help with the spanner sizes, but I bought my hose kit from Powers. I went for the black ones, as I don’t have a blue car or rocker cover

wily_coyote

78 posts

62 months

Friday 23rd September
quotequote all
Or you could go down this route....

While you're in there, service the oil cooler and clean the additional gauze filter in the top inlet of the oil catch tank ;-)


m4tti

5,171 posts

137 months

Friday 23rd September
quotequote all
Have you got the hoses to release Tony?

TonyOxford

Original Poster:

767 posts

179 months

Saturday
quotequote all
Hello were is the best place to get them 4 oil pipes with the blue and red on or can one get the pipes with braided hoses and no coloured ends who would I get them from?

phillpot

16,764 posts

165 months

Saturday
quotequote all
TonyOxford said:
And what size spanner do I need for this is it glued on I tried grips and it's not moving
It will be tight, you'll make a mess of it trying to use grips!

idea Cut a "spanner" from cardboard, measure the width of the gap now go and buy a spanner that size.

Or buy one of these . . .

https://www.amazon.co.uk/Electronic-Micrometer-Hou...

glow worm

5,094 posts

209 months

Saturday
quotequote all
TonyOxford said:
Hello were is the best place to get them 4 oil pipes with the blue and red on or can one get the pipes with braided hoses and no coloured ends who would I get them from?
TVR Power all stainless braided ... about £500 IIRC

Editted:-
Here they are:- https://powersperformance.co.uk/store/slug/SS-HOSE...

Gone up a bit in price nearly £700 now smile

Edited by glow worm on Saturday 1st October 20:10

mk1fan

10,108 posts

207 months

Saturday
quotequote all
Elmswood got mine from Pirtek. Just take your old ones in. Seem to recall there being an alternative routing of the pipes to eliminate the chaffing.

Sagi Badger

551 posts

175 months

Saturday
quotequote all
OP, Tony, you have mail from me
J