Clutch Fluid cover

Clutch Fluid cover

Author
Discussion

DCerebrate

Original Poster:

357 posts

116 months

Saturday 24th August
quotequote all
You will know what I mean, the black slight domed oval cover, that goes downhill after 25y! Is anyone selling these?

Byker28i

66,038 posts

223 months

Monday 26th August
quotequote all
Someone previously made one out of metal for their car, but you'd need an english wheel as it curves in all directions.

Mines not silicon sealed. I put a rubber seal around the wing part and some edging on the cover, so it's easy to remove. Hasn't leaked...

There's a photo on here somewhere...

DCerebrate

Original Poster:

357 posts

116 months

Monday 26th August
quotequote all
Thanks guys, still looking for an original plastic cover, will phone around. Not many engineers around here for hand making a metal cover, that sounds like a very special skill!

DCerebrate

Original Poster:

357 posts

116 months

Monday 26th August
quotequote all
I think the Powers one is out of stock but I will phone.

Byker28i

66,038 posts

223 months

Tuesday 27th August
quotequote all
Found the one NoTaping made - seemed simpler, which inspired me to do mine




https://www.pistonheads.com/gassing/topic.asp?h=0&...


DCerebrate

Original Poster:

357 posts

116 months

Tuesday 27th August
quotequote all
That looks really cool! 😎

notaping

331 posts

77 months

Tuesday 27th August
quotequote all
That was just a prototype. I always meant to refine it and create some patterns for running off some more. As usual - other things got in the way.
I made a Blender model though smile


. .

DCerebrate

Original Poster:

357 posts

116 months

Tuesday 27th August
quotequote all
Far exceeds the original design!

DCerebrate

Original Poster:

357 posts

116 months

Wednesday 28th August
quotequote all
P.S. just took a call from Powers, they coincidentally found an unmarked box with just a few of the factory clutch reservoir covers remaining!

Andrea7

117 posts

8 months

Wednesday 28th August
quotequote all
DCerebrate said:
P.S. just took a call from Powers, they coincidentally found an unmarked box with just a few of the factory clutch reservoir covers remaining!
Ok.
Perfect.
Anyway I tought that made a fiberglass copy of the OEM one it's really simple and straightforward if it's needed....

Mr Cerbera

5,064 posts

236 months

Saturday 7th September
quotequote all
notaping said:
That was just a prototype. I always meant to refine it and create some patterns for running off some more. As usual - other things got in the way.
I made a Blender model though smile
Oooh, Gordon, when I first saw your work of art, I hadn't noticed how well you had trimmed the actual hole in the wing.


Could you possibly point me in the direction of the appropriate edging ?

Many thanks,

PJ


Edited by Mr Cerbera on Saturday 7th September 11:15

notaping

331 posts

77 months

Saturday 7th September
quotequote all
Hi Paul,

The original wing on mine had a downward lip - almost as if TVR had intended it to be a gutter, but had formed it the wrong way smile



Cut this off as close to the edge as possible. . .



Then I used the TVR headlight rubber for the edging. https://motaclan.com/product/seal-headlamp-cerbera...



This creates a nice gutter on it's own - so any water running off the wing runs round to the bottom and out again. Place the joint of the seal at the bottom.

How's the project going? Any closer to the road?

G.

TwinKam

3,122 posts

101 months

Saturday 7th September
quotequote all
Byker28i said:
Someone previously made one out of metal for their car, but you'd need an english wheel as it curves in all directions.

Mines not silicon sealed. I put a rubber seal around the wing part and some edging on the cover, so it's easy to remove. Hasn't leaked...

There's a photo on here somewhere...
You wouldn't need a wheel, you could form it out of aluminium sheet with just a sandbag and a domed mallet.

Mr Cerbera

5,064 posts

236 months

Sunday 8th September
quotequote all
notaping said:
Hi Paul,

The original wing on mine had a downward lip - almost as if TVR had intended it to be a gutter, but had formed it the wrong way smile
......

Cut this off as close to the edge as possible. . .

......

Then I used the TVR headlight rubber for the edging. ....

......

This creates a nice gutter on it's own - so any water running off the wing runs round to the bottom and out again. Place the joint of the seal at the bottom.
Many thanks for your astonishingly high quality details - Always appreciated thumbup
notaping said:
How's the project going? Any closer to the road?

G.
After missing the Nordschleife DE TVR gig, I became very depressed with the whole entity.
I was just about to hang myself from the longest Yardarm this afternoon

THEN

Good Grief !
the HP Banjo pipe end jumped across the inpossible gap and slipped onto its retaining bolt, taking the appropriate washers with it !

REJOICE, REJOICE !

I will now go and consume my own bodyweight in Beer to celebrate.

Almost there.....


.... and it's On ! thumbup



All the very best to you and yours, Sir.
Enjoy a (hopefully) Sunny Sunday.

PJ beer
__________________________________________________________________________
ETA

Why oh why don't I keep my trap shut....
Mounted the Banjo 180° the wrong way round and had to take it apart.

Too upset to drink....
frown


Edited by Mr Cerbera on Sunday 8th September 20:46

notaping

331 posts

77 months

Sunday 8th September
quotequote all
That looks very tidy indeed. Well done. Keep it going.

Just been out for a wee burl in the car myself - so I've got that TVR grin at the moment. Might just join you in a couple of beers.

Your health sir. beer

Byker28i

66,038 posts

223 months

Wednesday 11th September
quotequote all
Remembered to take a photo of mine.



I've had no leaks, makes access really easy

I need to tidy up as the covers been rubbing