AJP8 in F3000 car!

AJP8 in F3000 car!

Author
Discussion

alinton

Original Poster:

965 posts

236 months

Sunday 16th August 2009
quotequote all
Check out this AJP8 seen last week in an F3000 car.

Apparently the last such engine to come out of the factory.



Edited by alinton on Sunday 16th August 21:05

Dupont666

21,606 posts

192 months

Sunday 16th August 2009
quotequote all
want to post a link to assist us?

Jimbo007

8 posts

233 months

Sunday 16th August 2009
quotequote all
I thought I saw it at Raceproved and after a quick check - here is the link:

http://www.raceproved.com/ajp-v8-powered-f3000-in-...

alinton

Original Poster:

965 posts

236 months

Sunday 16th August 2009
quotequote all
Sorry, the image upload didn't work when I thought it had.

I've a few more photos too.


rgds

A.

fatjon

2,183 posts

213 months

Monday 17th August 2009
quotequote all
very curious about what transaxle was used, was this car built bt raceproved?


ridds

8,215 posts

244 months

Monday 17th August 2009
quotequote all
There's a few of these floating around, I'm sure it was part of the original concept of the AJP, a base engine that they could use for either the road car or also sell on to motorsport.

Don't think the single seater side of it ever took off though.

Steve_T

6,356 posts

272 months

Monday 17th August 2009
quotequote all
Thought the original one was built circa 96.

FUBAR

17,062 posts

238 months

Monday 17th August 2009
quotequote all
There was a single seater (possibly F3000?) with an AJP in sitting on the MotorShow stand a couple of years back.

V8 GRF

7,294 posts

210 months

Monday 17th August 2009
quotequote all
If it's the original car then it certainly wasn't one of the last of the engines to come out of the factory, more like one of the first!

The reason for designing the AJP V8 was Peter Wheeler at the time wanted TVR power to become a standalone business as up to that point TVR Power had only produced engines for TVR cars and as such had no income, so the idea was to create an engine that could be marketed as a race engine which led to its design as a stress member. At the time there was a regulation change ongoing in Formula 3000 that led to a large number of defunked chassis being available. MCD promoted this with the intention of creating a single seater series called the Grand Prix Lights with the aim of TVR Power leasing the engines to the teams and thus creating an income stream for TVR Power. A car was built and successfully tested round Pembery and produced nearly double the torque of a F1 engine of the time. An event was held at the Belfry in conjunction with the RAC and race teams with these spare chassis were invited to attend. At this point, according to Al, Peter Wheeler withdrew his support and as a result the engine was only used in the Cerbera.

peteA

2,681 posts

234 months

Monday 17th August 2009
quotequote all
V8 GRF said:
If it's the original car then it certainly wasn't one of the last of the engines to come out of the factory, more like one of the first!

The reason for designing the AJP V8 was Peter Wheeler at the time wanted TVR power to become a standalone business as up to that point TVR Power had only produced engines for TVR cars and as such had no income, so the idea was to create an engine that could be marketed as a race engine which led to its design as a stress member. At the time there was a regulation change ongoing in Formula 3000 that led to a large number of defunked chassis being available. MCD promoted this with the intention of creating a single seater series called the Grand Prix Lights with the aim of TVR Power leasing the engines to the teams and thus creating an income stream for TVR Power. A car was built and successfully tested round Pembery and produced nearly double the torque of a F1 engine of the time. An event was held at the Belfry in conjunction with the RAC and race teams with these spare chassis were invited to attend. At this point, according to Al, Peter Wheeler withdrew his support and as a result the engine was only used in the Cerbera.
Didnt avid Coulthard drive it...or one of the 3000 cars with the AJP engine?

dean_ratpac

1,582 posts

278 months

Monday 17th August 2009
quotequote all
Steve_T said:
Thought the original one was built circa 96.
i think Coulthard drove these... or something with these old cars. nothing new on news.

RichB

51,518 posts

284 months

Monday 17th August 2009
quotequote all
Wasn't Melling's original design, prior to hooking up with PW, for a compact V8 intended for Yamaha as a race engine designed to fit in a 22"x22" box or something?

fatjon

2,183 posts

213 months

Monday 17th August 2009
quotequote all
The one in the pic seems to be a dry sump version and looks a little wierd around the back of the block. I may pop into raceproved this week and have a snoop around. We were discussing using an AJP for a single seater rear engine project only this weekend. This has got me curious now.

I reckon it's more likely an earlier prototype than a late engine as all the castings were changed for the dry sump version. If I can find time to go for a look I'll report back.

teamHOLDENracing

5,089 posts

267 months

Monday 17th August 2009
quotequote all
It looks like a bog standard dry sumped race engine to me, with an adaptor plate and a transaxle gearbox on the back.

TVR had an ex Coulthard F3000 chassis with one fitted to it. There is another chap, Mike, who has a similar F3000 also with an AJP fitted. It is a cheap option compared with other suitable race engines for these cars

The Surveyor

7,576 posts

237 months

Monday 17th August 2009
quotequote all
The ex Coulthard car was on display at HHC in Hexham for a few years before heading back to the factory and then onto the Motorshow.

Paul

dinkel

26,932 posts

258 months

Monday 17th August 2009
quotequote all
What displacement is this then. Sized down to 3 litre?

Bore almost matches DFV bore . . .

teamHOLDENracing

5,089 posts

267 months

Monday 17th August 2009
quotequote all
No - its just a standard 4.5 race AJP. F3000 finished years ago, no need to restrict to 3 litres

alinton

Original Poster:

965 posts

236 months

Monday 17th August 2009
quotequote all
The guy who owns it told me it was the last. He had drawn the attention of Al Melling apparently and went to see him, and it was confirmed.

I wonder if the numbers shown in this picture prove or disprove this?



A.

teamHOLDENracing

5,089 posts

267 months

Monday 17th August 2009
quotequote all
TVR didn't sell the dry sumped engine apart from to the odd exceptional customer.. until late 2004 when the Russian business boy pulled the plug on the Tuscan Challenge and they were all sold off. There have been engines built from new race blocks since, but to be honest does it matter whether it was the last, the penultimate or the first - its just good to see it in a race car

itiejim

1,821 posts

205 months

Monday 17th August 2009
quotequote all
Te numbers on the back of the heads are just casting numbers - they're the same as on my 4.5.