glove box hinge t350 / tamora / sagaris
Discussion
THREEFISHORANGE said:
Thanks for the quick uptake on the payments.
List for despatched hinges up to press as follows.
NBON
ROBERTO BLANCO
JAYDOM
YAAN
NFCF
BRIZA
LUCKEY
GORDONISALIVE .
NINETYNINE
KONRADHOLL
BRIGHTYELLOWTVR
THE SURVEYOR
MK1FAN.
Hopefully be with asap As mentioned in the returned emails , they will need a signature at your end.
Thanks Chris
List for despatched hinges up to press as follows.
NBON
ROBERTO BLANCO
JAYDOM
YAAN
NFCF
BRIZA
LUCKEY
GORDONISALIVE .
NINETYNINE
KONRADHOLL
BRIGHTYELLOWTVR
THE SURVEYOR
MK1FAN.
Hopefully be with asap As mentioned in the returned emails , they will need a signature at your end.
Thanks Chris
Edited by THREEFISHORANGE on Wednesday 5th July 17:10

Briza said:
Hinge received, thanks very much.
The missus signed for it as i'm in Iraq, thought it was a gift for her!!
Glad you received it okay Briza. Bet she thought it was jewellery lol.?? 


Edited by THREEFISHORANGE on Wednesday 5th July 17:11
Edited by THREEFISHORANGE on Wednesday 5th July 17:12
THREEFISHORANGE said:
THREEFISHORANGE said:
Thanks for the quick uptake on the payments.
List for despatched hinges up to press as follows.
NBON
ROBERTO BLANCO
JAYDOM
YAAN
NFCF
BRIZA
LUCKEY
GORDONISALIVE .
NINETYNINE
KONRADHOLL
BRIGHTYELLOWTVR
THE SURVEYOR
MK1FAN.
Hopefully be with asap As mentioned in the returned emails , they will need a signature at your end.
Thanks Chris
List for despatched hinges up to press as follows.
NBON
ROBERTO BLANCO
JAYDOM
YAAN
NFCF
BRIZA
LUCKEY
GORDONISALIVE .
NINETYNINE
KONRADHOLL
BRIGHTYELLOWTVR
THE SURVEYOR
MK1FAN.
Hopefully be with asap As mentioned in the returned emails , they will need a signature at your end.
Thanks Chris
Edited by THREEFISHORANGE on Wednesday 5th July 17:10
NBON said:
Yes fitted. It does fit better. Took a while to get the alignment sorted.
Reversed the springs aswell so it shouldn't pop open.
Yes I did twist the original springs to suit so it did pull the lid down. Doesn't open when going over a sharp jump. As per pic on.page 1 of this thread....Reversed the springs aswell so it shouldn't pop open.
Edited by THREEFISHORANGE on Wednesday 5th July 21:59
Yaaan said:
Received mine yesterday too, thanks!
My original hinge was also glued to the lid. Are a couple of short self tapping screws the best option for reattaching the new hinge?
Choice is yours really. The slots are there to accommodate bolts,screws set pins etc. I used M5 brass bobbins that i bonded into the new fibreglass lid then used M5 set pins.Or you can bond it in using epoxy araldite or the like.My original hinge was also glued to the lid. Are a couple of short self tapping screws the best option for reattaching the new hinge?
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff