AIM SmartyCam and SOLO 2 DL in Ariel Atom 3 (CAN INterface)
Discussion
Hi Guys,
Has anyone installed the AIM SmartyCam with the Solo 2 DL. I'm trying to work out how the Solo 2 DL connects into the Atom 3 ECU. Essentially the CAN interface needs to connect through to the ECU CAN Hi/Lo cables but not sure which ones they are. Any help will be really appreciated.
Has anyone installed the AIM SmartyCam with the Solo 2 DL. I'm trying to work out how the Solo 2 DL connects into the Atom 3 ECU. Essentially the CAN interface needs to connect through to the ECU CAN Hi/Lo cables but not sure which ones they are. Any help will be really appreciated.
What ECU do you have
The can hi/low will be identified on the pinout, the solo will normally connect to a OBD plug but I doubt there is one on the atom so you will probably need to splice it into the ecu harness.
If is an MBE they sell a obd plug and flying lead as that is how the mbe pc software interfaces.
The can hi/low will be identified on the pinout, the solo will normally connect to a OBD plug but I doubt there is one on the atom so you will probably need to splice it into the ecu harness.
If is an MBE they sell a obd plug and flying lead as that is how the mbe pc software interfaces.
Gassing Station | Ariel | Top of Page | What's New | My Stuff