What 20/50?

Author
Discussion

Perseverant

Original Poster:

440 posts

126 months

Tuesday 24th October 2023
quotequote all
Probably not a new question. I'm about to do the annual oil change on my XK120. I don't do as many miles as I'd like as my wife is not too well these days. I've often used Castrol and other well known brands, and when I first got the car a local factor gave me a pretty good deal on Miller's - a bulk 40 litre drum as I recollect. Looking online shows quite a range of prices and some less well known (to me at any rate) makers. During lockdown I bought decking oil from Smith and Allen, which did the job fine and I also see 20/50 oil from them. I just wonder if anyone has any comments?

Riley Blue

22,324 posts

241 months

Tuesday 24th October 2023
quotequote all
Following a recommendation by a local MG specialist I've used Millers Oils Classic Pistoneeze 20w-50 in my Riley for around 10 years with no problems, remarkably the engine is still oil-tight too. I've had no reason to change so don't know how it compares price-wise with other lubricants.

https://www.millersoils-shop.co.uk/classic-pistone...

j4r4lly

684 posts

150 months

Tuesday 24th October 2023
quotequote all
Ive been using Valvoline 20/50 in my 1983 Capri 2.8 injection for the past 12 years.

https://www.ebay.co.uk/itm/225181027793?chn=ps&amp...tongue outla-1816181029379&abcId=9303860&merchantid=428632137&gclid=CjwKCAjw1t2pBhAFEiwA_-A-NFjUBvQjLsQD6SJqm28ASFUw3zbrdk_1L4N1hQZyqRR5Ax9PAb1YexoC3YgQAvD_BwE

tog

4,730 posts

243 months

Tuesday 24th October 2023
quotequote all
My Bristol specialist always preferred Valvoline Racing 20/50 too.

roperrich

82 posts

196 months

Tuesday 24th October 2023
quotequote all
More recently I've been using Valvoline VR1 20/50 which seems to work well and is easy to get hold of. I've also recently tried the classic Halfords 20/50 oil, I didn't expect much but the car really seemed to like it, so would use again. I'm also using an additive - Ametech oil treatment. This is the only additive I would highly recommend and have been using it for about 10 years. If you want the highest quality options ring Anglo American oil company in Poole, I've used their engine, gearbox & differential products and they are probably the best on the market.

sixor8

6,989 posts

283 months

Tuesday 24th October 2023
quotequote all
I needed 20w/50 mineral oil a couple of years ago for an old car and what irked me was that it was more expensive than synthetic or semi-synthetic oils in the 10w/40 or 5/30 range. frown Less demand I suppose.

OutInTheShed

11,491 posts

41 months

Tuesday 24th October 2023
quotequote all
roperrich said:
More recently I've been using Valvoline VR1 20/50 which seems to work well and is easy to get hold of. I've also recently tried the classic Halfords 20/50 oil, I didn't expect much but the car really seemed to like it, so would use again. I'm also using an additive - Ametech oil treatment. This is the only additive I would highly recommend and have been using it for about 10 years. If you want the highest quality options ring Anglo American oil company in Poole, I've used their engine, gearbox & differential products and they are probably the best on the market.
How could you tell the car 'liked it'? Happy face radiator grille?

Lotobear

8,002 posts

143 months

Wednesday 25th October 2023
quotequote all
I've always used Halfords Classic 20/50 in my Lotus twincams and had zero issues - it's pretty cheap and so I just used to change it every year regardless of miles covered. It will be made by one of the big firms, Comma perhaps?

ISTR it has the correct level of ZDDP which is critical to protect the cam lobes in a LTC. Given the similarities (hemi/OHC) between the LTC head and the Jag I imagine it would be a good choice


Julian Thompson

2,620 posts

253 months

Saturday 4th November 2023
quotequote all
The way this works is that the first number is the actual weight of the oil - in this case it’s a “20” weight oil when cold. That’s thicker than a “10” or a “5” or a “0” weight oil.

The second number is the “resistance to thinning” index of the oil. It is not related to the first number. As the oil gets hot it thins out - the second number determines how well it retains its viscosity. So in this case “50” indicates a very high resistance to thinning out when hot, whereas a “40” or “30” as your second number shows that the oil will run much thinner when hot.

Hope that helps.

mph

2,344 posts

297 months

Saturday 4th November 2023
quotequote all
Lotobear said:
I've always used Halfords Classic 20/50 in my Lotus twincams and had zero issues - it's pretty cheap and so I just used to change it every year regardless of miles covered. It will be made by one of the big firms, Comma perhaps?

ISTR it has the correct level of ZDDP which is critical to protect the cam lobes in a LTC. Given the similarities (hemi/OHC) between the LTC head and the Jag I imagine it would be a good choice
Unless they've changed the formulation recently Halfords 20/50 definitely does not have the recommended level of ZDDP.

Millers, Heritage (Fuzz Townsend) and several others are ok. Even Duckhams 20/50 Classic.

Sebring440

2,745 posts

111 months

Saturday 4th November 2023
quotequote all
mph said:
Unless they've changed the formulation recently Halfords 20/50 definitely does not have the recommended level of ZDDP.
Why do you say that? And what is the "recommended" level of ZDDP?



timster

373 posts

175 months

Saturday 4th November 2023
quotequote all
I use oil from these guys

https://www.smithandallan.com/product/smith-allan-...

I paid £34 delivered for 10 litres

dr_gn

16,565 posts

199 months

Sunday 5th November 2023
quotequote all
It’s a bit of a pointless question really, unless you’re asking for scientific tests on a particular engine which is of a particular mechanical standard.

You could put the most expensive or cheapest 20/50 over multiple brands in your engine, and have absolutely zero objective clue which one is ‘better’.

Sure, you might get some highly subjective answers, and some anecdotal ‘evidence’ about oil pressure or noise, but none of it will necessarily apply to your car in terms of which is the ‘best’.


mph

2,344 posts

297 months

Sunday 5th November 2023
quotequote all
Sebring440 said:
Why do you say that? And what is the "recommended" level of ZDDP?
I've read several articles on classic oils and Halfords is one of the brands that don't (or didn't) have the generally accepted levels of ZDDP.

The recommended level is between 1000 and 1400 ppm.

This article from Duckhams is quite informative.

https://www.duckhams.com/zddp-what-does-it-all-mea...

Heritage Oils, with the Fuzz Townsend connection, also have a bit of info.

https://motorspirit.co.uk/product/heritage-20w-50/




Edited by mph on Sunday 5th November 10:00

rovermorris999

5,290 posts

204 months

Sunday 5th November 2023
quotequote all
Another vote for https://aaoil.co.uk/
High levels of ZDDP and the 'classic' oils also have US military spec long term storage additives which is ideal for cars that get little use. Perhaps other oils also have such additives but I've not seem them promoted.
Not the cheapest though.

aeropilot

38,357 posts

242 months

Sunday 5th November 2023
quotequote all
tog said:
My Bristol specialist always preferred Valvoline Racing 20/50 too.
Yep, I always used to use Valvoline Racing 20/50 in my Sunbeam-Lotus as well, highly recommended.